Re: Stuck Telescoping Shaft

Posted by Dick L on June 02, 2000 at 03:33:39 from (209.240.200.136):

In Reply to: Stuck Telescoping Shaft posted by Mike on June 01, 2000 at 02:59:25:

I was using mine without the third link and picked it up to far and the front hit the tube an bent it slightly. I laid the tractor end of the shaft on a large block of wood and started in on the back side of the U joint with a sledge hammer and showed it no mercy, turning the shaft over 180 deg. when my arms got tired. It came loose and I was able to get it to slide in and out with the sledge and a body grinder.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Stuck Telescoping Shaft Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]