Posted by g mccool on February 06, 2009 at 18:22:45 from (207.189.225.67):
In Reply to: motorcycle posted by Bill Porter on February 06, 2009 at 17:33:30:
I am H D all the way. When I skin my knuckle I ever bleed H D. I rode my first H D when I was 12 & am 54 now. But there are a lot of good rides out there. First try to determine what type of riding you will be doing. Touring or just going 15 miles to your local Dariy Queen. There is a big diferance in the ride you need. Then go set on some. If your not comfortable just setting on it. Move on. Think maintence. It will cost a lot if you can't do your own work. Then go & test ride some. You will know when it is your bike. It just feels right. Most important of all. Take a safety course!!!!!!!!!! You may think you are a good rider. Or you may think I will just take it easy for the first couple months. WRONG. If you learn just one thing in this course it could be the thing that saves you from a accident. You didn't ask about helmets but I'm going to give you my 2 cents. If & when you buy a helmet don't look at the price tag. Walk up & down the isle trying on helmets until you find one that fits perfect & I mean perfect. Still don't look at the price tag. Then walk to the sales counter & pay for it. Then & only then is when you find out how much it cost. If your helmet doesn't fit. You won't be comfortable with it on. Gerald
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Nuts and Bolts of Fasteners - Part 2 - by Curtis Von Fange. In our previous article we discussed capscrews, bolts, and nuts along with their relative hardness and thread sizes. In this segment we will finish up on our fasteners and then work with ways to keep them from loosening up in the field. Capscrews, bolts and nuts are not the only means of holding two parts together. When dealing with thinner metals like sheet tin, a long bolt and
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
