Posted by mEl on February 01, 2009 at 10:04:35 from (75.104.128.39):
In Reply to: positive ground posted by matt knoeck on February 01, 2009 at 09:03:54:
Don't want to get too technical on here as most will either get lost or plain not care but to expand on what JD said I quote the ARRL handbook. " most modern circuits employ a chassis or ground plane or bus as a common conductor, this practice reduces the wiring or printed circuitry required and simplifies the schematic diagram. When the negative terminal of the power source is connected to this "ground" system, elecrtons flow from the negative terminal through the ground system and through the circuit elements to the positive terminal. While this is certainly a correct description of the action, it is more convenient to think of the common conductor as the "return" leg. To accomodate this reasoning, electrical engineers have adopted a positive to minus convention. This convention is adhered to in most technical literature. The arrows in semiconductor schematic symbols point in the direction of conventional current and away from actual electron flow" There is much more but I hunt and peck and most won't care anyway as long as the starter works when they push the button. No one seems to care which way the electrons are going. The hole theory is a whole other matter as my understanding is that it has to do with current flow through a semiconductor.. mEl KC3EH
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Diagnosing Engine Difficulty - Diesel Tractors - by Staff. The following suggestions are listed for your assistance. You can make simple adjustments on your tractor that will improve its operation and save you the time and expense of hiring someone to do it for you. Always make one adjustment at a time, and if the adjustment made does not improve the condition, return to the original setting before proceeding to the next adjustment. Hard Starting Cold air temperatures. Insufficient fuel.
... [Read Article]
Latest Ad:
one 8n and one 9n tractor. totaly restored,pretty much everything is new. one 6ft blade good shape.
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
