countryboybct said: (quoted from post at 19:45:42 01/25/09) Im having problems with my ford 3910 being too low to the ground especially on rough terrain. Is there a way to put higher profile tires on to raise the clearance? or possibly different rims? Right now it has 6.00X16 fronts and 12.4X28 rears
:) I have a 1984 Ford 3910 and I'm running 14.9 x 28's on the rear and 7.50 x 16's on front. I've seen a bunch of JD 2150's & 2155's running 16.9 x 28's on the rear, but they always looked to me like they were running down hill! :roll: :lol: The 14.9's & 7.50's will give you a LITTLE more clearance, but after all the 3910 IS a utility tractor! :roll: If this clearance issue is a serious problem, you might want to consider trading to a 4610 or similar tractor! :? Just my 2 cents worth (and worth every penny!) :lol:
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Tractor Traction - by Chris Pratt. Our first bout with traction problems came when cultivatin with our Massey-Harris Pony. Up till then, this tractor had been running a corn grinder and pulling a trailer. It had new unfilled rear tires and no wheel weights. The garden was already sprouting when we hooked up the mid-mount shovel cultivators to the Pony. The seed bed was soft enough that the rear end would spin and slowly work its way to the downhill side of the gardens slight incline. From this, we learned our lesson sinc
... [Read Article]
Latest Ad:
1965 International Harvester McCormick Farmall cub tractor 2,500. Two owner tractor. My grandfather bought new in 1966, then we inherited it. Have all the paperwork original manual and all maintenance records. It starts and moves. Comes with underbelly mower, plough, and some other attachments.
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
