Posted by rrlund on January 24, 2009 at 08:18:24 from (216.46.213.126):
Has anybody ever seen,or have an idea of how to make some kind of auger that would pull itself into the bottom of a round corn crib to pull the corn out into an elevator or the feed grinder auger? There used to be an old guy around here who hauled ear corn to Maumee all winter. I never saw the outfit that he used,but folks who shipped with him at the time,claimed he'd bring a thing with him that would work it's way back into the crib and pretty well empty it out with very little shoveling. I took it that it worked about like a bin sweep. I'd heard tell that it would never be OSHA approved,but worked like a dream. I grind about 2 1/2 tons every 3 days,and while it's the most exercise that I get anymore and is probably good for me,I don't know what's worse,sweating in a cold wind this time of year or shoveling in the summer heat. I know,another silo and high moisture corn,but I'm not up to spending that kind of money when it wouldn't take much for me to get out of the cattle business anyway.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Third Brush Generators - by Chris Pratt. While I love straightening sheet metal, cleaning, and painting old tractors, I use every excuse to avoid working on the on the electrics. I find the whole process sheer mystery. I have picked up and attempted to read every auto and farm electrics book with no improvement in the situation. They all seem to start with a chapter entitled "Theory of Electricity". After a few paragraphs I usually close the book and go back to banging out dents. A good friend and I were recently discussing our tractor electrical systems when he stated "I figure it all comes back to applying Ohms Law". At this point
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.