Posted by Steven f/AZ on January 22, 2009 at 16:17:45 from (24.121.133.155):
In Reply to: Loader Work posted by phillipd on January 22, 2009 at 15:55:08:
Doug - Iowa said: (quoted from post at 17:06:36 01/22/09)I'd like to find a grapple that somehow gets by without the third valve which looks to be a pain to install on my 706. I've thought maybe there's some way to plumb in off the return of the bucket circuit?
Our loaders have their own 3-spool control valves hooked up with either a power-beyond setup or their own reservoir and PTO pump... OR, you can get an electronic solenoid valve-splitter. They cost around $400 or so, we have one on the shelf that Dad might be willing to sell. Basically it hooks to one of your spools, and when you want it to control something else, just hold the button down.
Allan - all of our old Farmhand loaders had a chunk of heavy gauge pipe welded inside the grapple fork tube since they kept breaking. Drilled large holes through the existing pipe in several places, inserted heavy gauge pipe, welded through all the holes and around the ends. Never had another problem after that.
But, nothing really beats the new JD loader on the MFWD tractor...
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - On the Road with Dave Gohl: Deere Departed Friend - by Dave Gohl. Have you ever had to part with a dear friend? It's not easy. If it's due to death, your feelings could be in disarray for days, months or even years. Even now after almost 4 years, I still miss my dad. I remember when I was a kid my dad sometimes would tuck my brother and I in at night and we would ask him questions about his childhood on the farm. To this day, it's some of the best stories I've ever heard. And now, I'm so glad that I asked those questions, and if I were a little smarter i
... [Read Article]
Latest Ad:
1965 International Harvester McCormick Farmall cub tractor 2,500. Two owner tractor. My grandfather bought new in 1966, then we inherited it. Have all the paperwork original manual and all maintenance records. It starts and moves. Comes with underbelly mower, plough, and some other attachments.
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
