Posted by Guido on January 07, 2009 at 12:35:12 from (96.235.128.84):
In Reply to: Engine Question. posted by Guido on January 06, 2009 at 05:52:16:
Droop speed is what Mr. anderson said. The difference between wide open throttle at no load, and wide open throttle at full load. The answer has to do with "GOVERNOR DROOP" or how "sensitive" the governor assembly is to an engine speed change. How much speed will be lost depends on the governor rection. There is a formula that can be applied to determine engine % of speed droop. DROOP = MNL - MFL / MFL x 100%. Here is an example of an engine with the max no load speed of 2250 RPM'S. and a full load speed of 2100 RPM'S. 2250 - 2100 = 150 / 2100 = 0.0714285 x 100 = 7.14%. The link provided by Mr. Anderson will provide I'M sure more info that I can possibly muster. On engine driving gen sets it is critical to keep the rpm's at zero droop, IN ODER TO PRODUCE 60HZ POWER, those kinds of governors will keep the engine running at the same RPM'S regardless of load. They are called ISOCHRONOUS GOVERNORS. Guido.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - On the Road with Dave Gohl: Auction Musings - by Dave Gohl. I was thinking the other day about all the auctions I've been to in the last few years. There've been many. Some have been very good, some have been well, disappointing to say the least. But no matter how good or bad auctions may be, we always seem to stay until the item we've come for or are interested in is on the block. I've been to some auctions near and far. I think the furthest has been the Two Cylinder 7 in the Amana Colonies last year. Lots of stuff, lots of people. I've also atten
... [Read Article]
Latest Ad:
Late 50s early 60s international harvester 560 with cultivator
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
