|
Tractor Talk Discussion Board |
Re: T-man and stumps
[ View Follow Ups ] [ Post Followup ] [ Return to Tractor Talk Discussion Board ]
Posted by B.C. on April 09, 2000 at 17:16:17 from (209.51.192.9):
In Reply to: T-man and stumps posted by Lew on April 08, 2000 at 20:30:14:
I think I know what you're saying. The most comfortable way to get trees and stumps out is to watch somebody take a D6 or somesuch and blade them out. If they have any problem, the operator can put the blade down, cut some roots and then shove out what's left of the stump. For those occasions when for whatever reason a lesser, rubber tired machine is used, it's been my experience that it can be done if you're careful and, this is important, if you're also willing to get your butt off the tractor and keep cutting roots with an axe. It's a lot of work, but it'll keep you alive. Also, it's necessary to pull or nudge with the tractor something short of all all-out effort, because as others have noted, that could very well be the last thing you do. All that assumes that the stump is on a level, smooth, firm piece of ground, and not on a sidehill or in a bunch of rocks. In situations like that dynamite or only an axe and a shovel would be appropriate.
Follow Ups:
Home
| Forums
| Order Support
Today's Featured Article -
A Tinker�s Guide to Manifold Repairs - by Curtis Von Fange. A common characteristic of keeping older equipment is that some parts to make repairs can be extremely difficult to locate. For example, finding a replacement for a cracked intake or exhaust manifold on a unique tractor or odd brand can be a frustrating and downright impossible mission. So, what is an alternative solution to scraping out that �one of a kind� piece of history? First, decide if you are one to try a repair yourself or have someone else do it. If you are uncomfortable about
... [Read Article]
Latest Ad:
2555 Mahindra Shuttle 4x4 heat,air,diesel,7ft Mahindra heavy duty bushhog 7ft snowblade bucket
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|