Posted by Dave from MN on December 14, 2008 at 18:07:14 from (96.24.108.212):
In Reply to: Bad Weather Update posted by in-too-deep on December 14, 2008 at 16:28:45:
I hear ya, The oliver with that nice heated cab I was looking so forward to blowing with started right up, BUT that bargain blower is giving me trouble. PTO wont stay on the tractor, I can not get that retaining butten to snap back, gotta be something wrong with that new shaft, Before it came off it doesnt seem like the blower want to throw the snow, I am hoping it's just because it needs ALOT of snow to really throw it. It's 8' wide x 4.5' tall with 3 augers. Came in not to long ago from using the 544 and the smaller blower, holy smoley roley is it cold and windy out there, my eye were watering and when I blinked they would freeze shut, kinda like whenyou wake up in the morning with crusted pink eye, first time that happened to me. Hope things get better for you up there looks like your getting the bulk of the snow and should have -30 windchill right about now. Were at -20 and winds and temp are getting worse.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Nuts and Bolts of Fasteners - Part 2 - by Curtis Von Fange. In our previous article we discussed capscrews, bolts, and nuts along with their relative hardness and thread sizes. In this segment we will finish up on our fasteners and then work with ways to keep them from loosening up in the field. Capscrews, bolts and nuts are not the only means of holding two parts together. When dealing with thinner metals like sheet tin, a long bolt and
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.