I have a good neighbor that would help me out in a heartbeat. If he needs to be pulled out or needs a hole dug with the backhoe, I'll do it no problem because I know if I need some help he'll bring his tractor right over. The guy I bought my land from, who still lives out there, is another story. He asked if I could go to pick up an 8N for him with my truck and trailer. I said I could if he paid for the gas. Anyway, the day came when he wanted to pick it up and I was too busy, so I let him borrow my truck and trailer. He said he'd be about 2 1/2 or 3 hours. 7 hours later he returns. He got lost and then started complaining that my truck uses a lot of gas. He said he put $50 in and had to put some more in on the way back. I had to take about 40 ft. of chains and use my skid steer to pull my trailer out of the mud so he could use it. I didn't have a driveway yet. When I got in my truck to come home, I noticed the gas gauge was at a 1/4 tank. Exactly where it was when he took my truck. I just thought you cheap..., you couldn't even fill my truck up after taking it for a whole day. If he would have had to hire someone it would have cost him at least 5 or $600 to haul the tractor. He also said he was going to get the county to upgrade the road if I could put in my own approach. The approach was his responsibility since he subdivided but I said I could build it as long as I didn't have to pay for the road. Well, I ended up building the approach ($1500 value) and had to pay another $1500 into upgrading the county road. The seller paid zero. He wanted me to clear a fence line for him 1/2 a mile long with my Cat. No way in he__! I don't understand why people are so dumb. I have equipment that could really help them out and I would do a lot for no charge like if we got a huge dump of snow. If they want to be so cheap and anytime I could use some help, their machine is broken down or they're too busy, why would I help them out in a bind? Unfortunately there are a lot of people that want you to drop everything to help them but when you need help, they are too busy. When I first started landscaping and showed up with a new machine, several people thought I must have a lot of money to have new machine. It took the next 4 years to pay for it. I asked one lady at a $50 job, I never did get paid for, what she thought my skid steer was worth. She guessed around $10,000 and seemed shocked when I told her it was close to $30,000. I've learned only to let people who I know are careful operators ever run my machines. Even then, I had to pay over $7000 to rebuild the engine in my Cat. A friend pushed over a tree and didn't back up to push on the stump that pulled out. He had a branch magically find the 2 inch hole in the belly pan to change the oil and punctured my oil pan. Never offered to pay a dime! Some real cheapskates out there for sure. Dave
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Nuts and Bolts of Fasteners - Part 2 - by Curtis Von Fange. In our previous article we discussed capscrews, bolts, and nuts along with their relative hardness and thread sizes. In this segment we will finish up on our fasteners and then work with ways to keep them from loosening up in the field. Capscrews, bolts and nuts are not the only means of holding two parts together. When dealing with thinner metals like sheet tin, a long bolt and
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
