I have a Woodmaster made in MN. Figured the payback in 3 years I think it was more like 2. I Have about 8oo gallon of space for oil and would burn it out in 3 months so at 1600 gallon per year at 3.00-3.50 per gallon it pays back fast. I think I had about $8,000 in it . I did all the work myself for installation. If you go that route don't scrimp on size figure everything up one size you wont be sorry. I have the 5400 suppose to heat 10,000 sq ft It will take a block almost 5ft long and has a 27inx27in door. I made a hoist from barn door track and steel tubing then added a 500pound line winch to that. Then use some 1 inch rod for the forks 8inches apart mount a point for the line hook and away you go. Now you don't have to split much and can put big stuff in with out the work. Oh the rods want to be about 2-3 ft long on the sides. This way the wife can fire it when I'm gone easier.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Sunday Drives - by Cowboy. Summer was finally upon us here in Northern Maine. We have two types of industry up here, one being "Forestry" (Wood Products) and the other "Farming" (Potatoes). There is no shortage of farm tractors and equipment around here! I have been restoring old Farm Tractors for the past 6 years, and have found it easier and less expensive to hit all the auctions and purchase whole tractors for parts needed. My wife who works at a local school, and only has weekends and summers off, while on t
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
