WOW if you learned anything from the posts, other than there are a lot of experts out there with different ideas about welding rod them I'm surprised. 6010 is for AC welders and good for flat welding 6011 is for AC welders and is good for all positions 6013 is for AC welders and can be used on old rusty farm equipment without loosing the strength value of the rod.
7014 and 7018 are for DC welders since you have an AC I would stick the 60 series rods for best welding. You should get a welding rod chart that shows the amperage for each rod. Any welding shop should have one. You have to know three things type of rod. Size of rod and thickness of the metal. Just think bigger more amps. 6011 1/8 rod is the best for all around home welding with an AC welder. Cheap does a reasonably good job and works in all positions. It might help to take a night school course on welding to learn the basics. Its not an easy thing to do to learn how to weld by just playing around as you need to know how to move the rod for different welds. Also next thing get a good 4 1/4 or 6 in. offset grinder you will need it. Harbor freight has some good ones and also an air needle slag remover is always good to have to make better welds. Walt
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Sunday Drives - by Cowboy. Summer was finally upon us here in Northern Maine. We have two types of industry up here, one being "Forestry" (Wood Products) and the other "Farming" (Potatoes). There is no shortage of farm tractors and equipment around here! I have been restoring old Farm Tractors for the past 6 years, and have found it easier and less expensive to hit all the auctions and purchase whole tractors for parts needed. My wife who works at a local school, and only has weekends and summers off, while on t
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
