First off that plow should work good on that tractor, only thing that tractor should handle a 3 bottom with no trouble, The coulters were not an option but standard on every plow and it is not wise to try to plow without them, it will never work correctly if they are not there. And if it has not clearance for the coulter to pto shaft sounds like you have the pto extension still bolted on, 4 bolts where the stay chains mount, it needs to be removed for everything except a pull type pto powered implement hooked to the swinging drawbar or as standard the V bar that fastens to the lift arms and the 11 hole cross drawbar. And those are stay, not sway chains and are the correct length when the lift arms are up in top as far as they will go with the 11 hole drawbar in place, if you shorten them then the lift arms will not raise and something will break, they were made correct and non adjustable for length when tractor was made. And the plows were designed for use without the stabilizer bars. Check that PTO because there is something on it that does not belong there if it is anyware close to the plow. Could be an over running clutch that you need to take off as well as the pto extension.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Engine Rebuild Kit - by Curtis Von Fange. I always liked engine rebuild kits. They have all the replacement parts for overhauling an engine without going to the store to get gaskets, special measuring tools, or miscellaneous parts. They come neatly packaged, clean and tidy. But it's important not to let that packaging lull you into a false sense of security. The appearance of matching sleeves, pistons, rings, and bearings can cause frustration and agony if not properly measured and installed in a workshop environment. Following c
... [Read Article]
Latest Ad:
one 8n and one 9n tractor. totaly restored,pretty much everything is new. one 6ft blade good shape.
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
