Posted by Chooch on July 21, 2008 at 13:14:06 from (70.239.89.241):
In Reply to: Re: land survey posted by T_Bone on July 21, 2008 at 09:07:26:
T-Bone,
In Indiana, you are required to set sufficient property corners such that the survey can be retraced. Most surveyors will set every corner unless there is an obstruction to setting a particular corner (i.e. tree, concrete sidewalk, outbuilding, etc...) At that point, about half will set a witness corner that is defined on the plat as being xx feet from the true corner. Most surveyors set a rebar with a plastic cap which has surveyor's name and license number stamped into it.
In regard to the second question, without having any knowledge of the survey laws in Arizona, my answer, based upon Indiana laws, would be not necessarily. Filing a survey at the courthouse does put adjoining landowners and others surveyors on notice that a survey has been conducted but does little in "proving" the survey is correct. A survey conducted by a licensed land surveyor is that surveyors professional opinion on the location of a particular boundary. It is not the absolute location of that boundary. The quality of the survey will be based upon the surveyor's experience of the area, his due diligence in conducting courthouse and field research, and his application of proper rules of surveying. Each survey has to be evaluated using record documents, recovered monumentation, evidence of occupied boundaries and proper rules of evaluating all of the above. The goal of each survey is to "follow in the footsteps" of the previous surveyors.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - A 1937 John Deere Unstuck - by Gary Hickman. Here is my story of how I got the pistons out of a 1937 JD B that the engine had been stuck for about 14 years: About 12 years ago my Dad gave me one of the tractors I ran as I was growing up on our farm in central Nebraska. The engine on this tractor, a 1937 John Deere "B", had been stuck for 2 years before he gave it to me. This last spring (1999) I hauled the tractor to our 2 acre lot in St. Libory Nebraska where it joined my antique machinery collection, at that time a 1929 Caterpillar T
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
