Posted by RodInNS on June 09, 2008 at 05:26:35 from (24.224.246.156):
In Reply to: What would you do?? posted by caleb on June 08, 2008 at 19:42:15:
I'd think that if you're just clearing out underbrush so that you can get a better look at what you have... then you want to do as little damage as possible. Get a good chain saw and a spacing saw and go at it with that. The thing with dozer's is this... You go into that mess with your typical dozer from the rental store, you won't have a forestry package... so you lose lights, you bust glass, you drop trees on the roof, you tear the exhaust off, you get rocks stuck in the under gear because it's not guarded properly, ETC. BT/DT spent many hours clearing land with a dozer that IS guarded. These things happen to seasoned, professional operators, not just rookies. That's why forestry machines are specially guarded for their work. How much damage do you want to pay for at the end of the week?? On top of that, if you're crawling around between trees that you want to save, you will do damage to the roots and often to the trunks of the larger trees, no matter how hard you try no to damage them. So... again, I would suggest that you thin it manually, see what you have, and then clear what you want clear later on.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - A Tractor's Point of View - by John Manley. I began my life on August 3,1941. I was actually built at different times and days but I was officially an M Farmall on August 3.I was real nice and shiny. That�s me, in the old picture, third from the left. I was loaded on that train and sent to a little town in South Carolina. I didn�t get to see much of that town. I was moved off the train fast and on to the dealer�s
... [Read Article]
Latest Ad:
1958 FORD RARE 4x4 801 TRACTOR, ELENCO/FRONT DRIVE, FRONTLOADER AND WEIGHTED REAR WHEELS, FIVE SPEED, LIVE PTO, GAS ENGINE, NEW REAR WHEELS AND TIRES, ENGINE RUNS.
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
