Posted by ScottyHOMEy on May 23, 2008 at 13:40:35 from (71.241.206.235):
In Reply to: Speaking of guns posted by Chris Jones on May 23, 2008 at 13:18:40:
You've got a whole was of questions there, Chris.
There's probasbly some better sites (not necessarily forums) you could google up to get you some better information.
Private purchase laws vary from state to state. Carry (concealed or open) likewise. Vehicles only complicate things. And transit through another state is a whole other can of worms.
Just to give an example. I lived in Maine. Then in NY for a few years, then in Ohio, and am now back in Maine. Handgun ownership in NY is so odious a proposition that I left mine with a friend in Maine while I was there. I wanted them with me in Ohio. The quickest route between ME and OH takes you through Massachusets. They have a one-year-in-the-slammer rule for possession of an unauthorized handgun and do not issue transit permits. NY isn't much easier to deal with, but they won't send you to jail. So I took a path out of Maine and across NH and Vermont. Even at that, I had the frames packed in the trailer with padlocks through or over them, and the cylinders and slides in the truck. Might just have easily had them shipped between federally licensed dealers on both ends.
New York's restrictions are a real bite in my opinion. Their geography cuts off New England. They stretch from the salt water to the Canadian border. There is no way to get out of New England and out to the rest of the country without crossing New York or (fuhgeddaboutit with a handgun) Canada.
Say you're in NC. You need to check out the laws on private gun sales in NC. Say you get a permit for concealed carry in NC. That ain't necessarily valid in any other state.
Do some googlin'. Start with NRA's site and follow the links. Just beware that it's the web, and there's a lot of not-so-good info out there, too.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Seeing an Old Friend - by Joe Evans. Dad had a concrete contracting business starting in 1960. One of his first pieces of equipment was a Ferguson TO-35 with a Davis loader. Dad replaced the TO-35 with a MF 202 Workbull, essentially an industrialized Ferguson 35 I am told. Dad bought the 202 new in 1962, and I recall quite clearly going to the dealer with him to sign for it.
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.