Go ahead and get the full set of caseholders for your Lee priming tool, by the time you buy three or four of them you would spend as much as the set.
Actually, the Lee holders make perfect sense. Since the holders are thinner than a regular caseholder, the ram doesn't have to move as far. This allows the Lee tool to have a lot of leverage without a lot of movement.
I generally steer clear of the Lee stuff, but when I got into handloading almost 30 years ago, the Lee tool was the only thing available for a cheap, auto-feeding priming tool. Today I might go for RCBS instead, but I do really like the Lee Auto-Prime.
Make sure and keep your priming tool lubricated, especially where the ram rides against the cam. If you get even a couple thousandths wear in this aread, the tool won't have a long enough stroke to fully seat the primer. Could be very embarassing, to say the least. Of course, if you do wear anything out, replacement parts are cheap from Lee.
One last comment. The Cadillac of hand priming tools is without a doubt the Sinclair. It looks like the standard (non-Auto-Prime) Lee, but it runs about a hundred bucks. Guess what case holders the Sinclair uses? Yep, it uses the cheap Lee holders.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - A Brief History of Tractors in Australia - by Bob Kavanagh. After Captain Cook's exploration of the east coast in 1770 the British Government decided to establish a penal colony in Australia. The first fleet arrived in 1788 and consisted mainly of convicts who were poorly equipped and new little of farming techniques. The colony remained far from self-supporting and it was not until the early 1800's that things started to improve. Free settlers started to arrive, they followed the explorers across the mountains and where land was suitable set up farms. T
... [Read Article]
Latest Ad:
For sale Farmall super A tractor is complete and has just been setting for awhile,it was running when pulled out of the barn,shouldn’t take to much to get it going asking 1100.00
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
