Posted by gots-2-go on February 28, 2008 at 05:03:26 from (69.72.57.102):
In Reply to: b farmall wide frt ? posted by none needed on February 27, 2008 at 20:16:54:
No, they were not equipped with a wide front from the factory.
But over the years someone may easily have adapated a wide front from something else to one.
I have a friend with some hilly land that owns a nice B. It has a belly mower on it, and he used it to cut the grass. A few years ago he had some health problems and his daughter wanted to keep the grass cut to help him out.
He was concerened about her inexperience running the tractor on the hilly ground, and asked if a wide front could be fitted to it.
We installed a wide front from an A on it, and in his mind he felt much better for her safety.
He kept the orginal narrow front, just in case he ever wants to return it back to orginal or sell it to someone else.
We all have seen custom things made and used on farm equipment. Whenever my dad saw something like that he would say; "Looky at that, it's been "Farmer Made" to suit someones needs".
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Tuning-Up Your Tractor: Plugs & Compression Testing - by Curtis Von Fange. The engine seems to run rough. In the exhaust you can hear an occasion 'poofing' sound like somethings not firing on all cylinders. Under loaded conditions the tractor seems to lack power and it belches black smoke out of the exhaust. For some reason it just doesn't want to start up without cranking and cranking the starter. All these conditions can be signals that your unit is in need of a tune up. Ok, so what is involved in a tune up? You say, swap plugs and file the points....now tha
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
