Posted by Lee in Iowa on February 17, 2008 at 12:13:48 from (66.172.198.85):
In Reply to: harvestore unloader posted by pafreehling on February 17, 2008 at 08:08:07:
Where are you located? I might be interested in the unloader. Like the other post said condition will greatly dictate price. Also if its old enough that it has two ratchet wheels instead of one it is old enough you can't get parts from harvestore that's why I may be interested either way maybe I can update or I might need one for parts someday. Saw a 20x60 on an auction and they couldn't get a bid on it to be moved. Years ago it cost at least $10000 to get one taken down moved and put back up. You can put in an unloading auger and a fan and put grain in it, fill with a vac/blower or put in a hatch on the side that an auger will reach. Lee
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Earthmaster Project Progress Just a little update on my Earthmaster......it's back from the dead! I pulled the head, and soaked the stuck valves with mystery oil overnight, re-installed the head, and bingo, the compression returned. But alas, my carb foiled me again, it would fire a second then flood out. After numerous dead ends for a replacement carb, I went to work fixing mine.I soldered new floats on the float arm, they came from an old motorcycle carb, replaced the packing on the throttle shaft with o-rings, cut new ga
... [Read Article]
Latest Ad:
Looking for a minneapolis moline zts
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
