In my area, there are lots of small plots that could be cut for hay that never get cut or even pastured. I have brush hogged a few for friends, usually repaying old favors when they helped me out in years gone by.
I am guessing that at least some of these plots could be hayed for free, since the owners are not doing anything with the ground, and it looks much better if the vegetation is cut down. The real farmers around the area don't want to be bothered messing with 4 or 5 acre fields.
If I was going to try to do this kind of haying, I would have a written contract signed beforehand. And I would carefully walk the field to see if there was anything to worry about hitting when I brought my machinery in to cut the hay. If I was going to make any improvements to the field, like planting alfalfa or fertilizing, I would want the contract to be multi-year. If it already was nice hay, I might even be willing to pay some per acre.
My area used to be reasonable sized farms, but over the last 30 years, most of the farms have been subdivided into much smaller acreages. Most people who have 10 acres figure out pretty fast that it wouldn't pay to have a bunch of money invested in equipment, so their land just sits there going to weeds.
If your area is this way, you might want to talk to neighbors that are not having their ground hayed or otherwise cultivated. You might find that some of them would let you hay for next to nothing. Good luck!
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Nuts and Bolts of Fasteners - Part 2 - by Curtis Von Fange. In our previous article we discussed capscrews, bolts, and nuts along with their relative hardness and thread sizes. In this segment we will finish up on our fasteners and then work with ways to keep them from loosening up in the field. Capscrews, bolts and nuts are not the only means of holding two parts together. When dealing with thinner metals like sheet tin, a long bolt and
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.