It has been said by some of the most experienced welders, that the biggest cause of frustration for a beginner welder is having a cheap AC buzz box to try and learn on. The differnce between a decent welder like an Idealarc 250 AC/DC Lincoln and a buzz box is night and day. Instead of going to all the trouble of finding a High Freq. and hooking it up to a less than desirable buzz box, why not just get a better welder? High frequency isn't for stick welding. It is mostly for TIG welding non ferous metals. A good welding machine will last a long, long time. Good used machines are also out there. $500 or even $1000 on a machine that will probably last your lifetime and save you thousands more seems like the most logical choice to me. If all you can afford is a buzz box, expect that you're going to do a lot of cursing and get really frustrated with it. Sorry. That's just the way it is. With lots of practice you can do an OK job with a buzz box but why? Try a good DC welder for a few minutes and you'll never want to go back to a buzz box. It really is a night and day difference. Dave
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Field Modifications (Sins of the Farmer) - by Staff. Picture a new Chevrolet driving down the street without it's grill, right fender and trunk lid. Imagine a crude hole made in the hood to accommodate a new taller air cleaner, the fender wells cut away to make way for larger tires, and half of a sliding glass door used to replace the windshield. Top that off with an old set of '36 Ford headlight shells bolted to the hood. Pretty unlikely for a car... but for a tractor, this is pretty normal. It seems that more often than not they a
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
