Posted by Tim in OR on January 23, 2008 at 19:52:21 from (71.34.79.99):
In Reply to: OT had an MRI today... posted by Dave from MN on January 23, 2008 at 10:38:05:
a few years ago, I started having tingling on my arms. This continued till I started having control issues with my legs. I went to the GP. He couldn't figure it out so he sent me in for a MRI. Next he told me "I don't know what it is but its not life threatning". I decided I would have to live with it till a few months later, I couldn't control my legs well enough to run, and My arms were numb all the time. I went to a different doctor. He sent me to a Neuralagist. After another MRI, she told me "This is whats wrong, You won't work till its fixed, and you will be very careful till its fixed. I had a ruptured disk, and a bone spur inside a vertebre. It was pinching my spinal chord. I've had it corrected, but because it was late, I still can't run, but I can feel in my arms again. If you don't like what your DR. says, Get another opinion. good luck Tim in OR
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Product Review: JB Weld - by Staff. JB Weld is basically an epoxy glue that does an exceptionally good job of bonding to cast iron and steel along with several other materials. As I mentioned, it is so common that I have yet to buy a tractor that did not have JB Weld used somewhere. It is sometimes used so well you can't tell its there and other times used as a sloppy quick fix. Finding where and how it can be used correctly is key to whether you are using it as an "inelegant hack" or an integral solution to difficult and expens
... [Read Article]
Latest Ad:
1945 Farmall wide body gas with pto and front plow. Runs good but needs new points.
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.