Posted by John T on December 28, 2007 at 05:24:00 from (66.244.83.147):
In Reply to: ground for a trailer posted by johndeereman on December 27, 2007 at 16:47:26:
Johndeereman, Anytime the ground current return path is weak or resistive badddddddd things start to happen such as turn or brake lights flashinG where theyre NOT supposed to and weak lights etc etc and ESPECIALLY poor electric brake performance cuz the current is seeking alternate return paths. YOU SIMPLY GOTTA RUN A SEPERATE DEDICTAED GROUND WIRE CIRCUIT and include it among the wires in the trailer connector plug n receptacle......PERIOD........ Im NOT saying a ground is impossible via the hitch n ball buttttttttt its best to also use what I post below.
I like to bolt n tack weld a stainless steel nut n bolt direct to the trailers iron frame and run a wire from it to the plugs ground terminal and then at the trucks receptacle do the same. If the truck has ready made receptacle and/or you can use a wiring harness adapter it should already have a good ground return (still dont hurt to supplement it per the above) but you still need the good trailer frame ground ya know.
Its sooooooo simple n easy n can only help so I suggest you do it.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Restoration Story: 1941 John Deere B Row Crop - by Anthony West (UK). The 1960's promise of white hot technology, to relieve us of the drudgery of everyday work and to replace it with increased leisure time has not materialised just yet....if anything most people are caught up in an ever increasing rat race, wishing that there was at least 36hours in a day!!!. The need for people to escape for periods of relaxation in an increasingly complex and pressured environment takes us into the realm of hobbies. For some it's scaling high mountains for others it's putting p
... [Read Article]
Latest Ad:
For sale Farmall super A tractor is complete and has just been setting for awhile,it was running when pulled out of the barn,shouldn’t take to much to get it going asking 1100.00
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
