Re: O/T Changing auto trans. to std. trans.

Posted by CWL on June 04, 2007 at 05:06:28 from (64.66.89.57):

In Reply to: O/T Changing auto trans. to std. trans. posted by 37 chief on June 03, 2007 at 08:04:53:

I'm a little late chiming in, but I did an automatic to manual swap in a 79 F150 4X4 short bed with a 400 V8. Got the tranny and transfer case from a truck of the same year and design. When I put it in all of the holes were in the frame. The driveshafts worked. There was already a plate in the floor board hump that only needed to be cut out for the 4-speed shifter to go through. If I remember right there was even an outlined depression were it needed to be cut. It was a very easy swap an I have been very pleased with it.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]