Posted by Mattias on November 29, 2007 at 13:15:10 from (79.138.132.135):
In Reply to: Got a Idea !! posted by TGIN on November 29, 2007 at 03:21:01:
Ok don't try that pushing thing if you have hard ground. I wouldn't like to stand around when someone try's that on many of the grounds round here. Especially the kind we call pinnmo (have no idea of a english word for that) If ypu try to push a pole in to that you will soon end up with sticks or if the pole is thick enough a lifted tractor. Pinnmo looks like gravel but is hard as rock, it can be harder than frozen ground, hard enough to force a 25 ton excavator to use the hook for frozen ground to losen it up. If its not the hardest kind i.e. soft enough to excavate stones at the edge of the bucket will rather brake tha come lose. Up till the 70's when excavators weren't as strong as now one had to use explosives to dig ditches in it. So take into consideration what kind of ground you have before you try pushing anything into it.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Nuts and Bolts of Fasteners - Part 2 - by Curtis Von Fange. In our previous article we discussed capscrews, bolts, and nuts along with their relative hardness and thread sizes. In this segment we will finish up on our fasteners and then work with ways to keep them from loosening up in the field. Capscrews, bolts and nuts are not the only means of holding two parts together. When dealing with thinner metals like sheet tin, a long bolt and
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.