Posted by Bob Kerr on January 17, 2008 at 09:00:33 from (64.12.117.74):
In Reply to: OT trailer floor posted by bhb on January 17, 2008 at 07:22:33:
White oak all the way! Get wood that doesn"t have any sap wood on the edges. It is considered a boat building wood and is tough stuff! I would not use rough cut as it leaves low spots for water to collect and will let fungus get started. As for water proofing, Mopping it down with used motor oil mixed with kerosene to thin it works exellent, and you get a new supply everytime you change oil in something.Also put some in an old sprayer with some kero to thin it and spray the underside. Main thing is to not let fungus get started in the wood. If you are worried about skidding on the oil just toss sand over it afterwards. The only drawback is if it gets wet with the oil on it, it will get slick! the first year or two put the oil on twice a year and after that once a year should be good if you oil it in the fall when you are done for the winter. If you do all that the wood might outlast the trailer!
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Revival of a John Deere Combine - by The Red, John Fritz. For several years I had been driving by a farm house on the west side of Indianapolis that had a John Deere combine parked in high weeds in a lot behind the house. The gentleman no longer farmed because the entire area was developed with housing and light industry. I had stopped several times and knocked on the door but no one would answer. My curiosity was up and I wanted to contact the owner. I wanted to see what he planned to do with the combine.
... [Read Article]
Latest Ad:
For sale Farmall super A tractor is complete and has just been setting for awhile,it was running when pulled out of the barn,shouldn’t take to much to get it going asking 1100.00
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
