Posted by rrlund on September 23, 2007 at 10:46:41 from (216.46.210.97):
In Reply to: round baler posted by Mr V on September 22, 2007 at 19:10:04:
Everybody is being a little too negative here. I think the M would handle one of the little 4x4 round balers,Hesston for example. Like somebody said,the lack of live power and hydraulics would be a drawback,but not impossible.If the baler had hydraulic twine arm,you would have to plug in a 2 spool valve to run it. A Gehl 1400 4x5 bale would even be doable with it. As for that live power and hydraulic problem,we had a neighbor that ran an Allis Chalmers RotoBaler with a John Deere A. You talk about having your hands full. Another neighbor had a JD 510 round baler with hydraulic twine arm. His son was using all the tractors that they had with dual remotes to get edible beans planted when he had hay ready to bale. He used one with single remote,plugged in the twine arm to put the twine on,got off and plugged in the endgate to kick the bale out. Anything is possible if you want to do it bad enough.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - What Oil Should I Use? - by Francis Robinson. I keep seein this question pop up over and over again in discussion groups all over the web. As with many things there are often several right answers and a few wrong ones. Some purist I'm sure will disagree to no end with what I will tell you but most of us out here in the real world don't really care do we ? Some of them only bring their noses down out of the air long enough to look down them anyway. If you are like me you are only doing this old tractor stuff because you enjoy it. You
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
