NEIFAA About 2two miles East of Garber Iowa. Drop down (South) on HWY 52 South of Garnavillo Iowa. Approx seven miles you will see a rock church on your left in the middle of nowhere. Turn right at the church onto x47. Go approx four miles and you will hit a brand new blacktop (C7X). This is called the Guttenberg / Garber HWY. Make a right turn and you drop into a big valley, cross a bridge then to the top of the hill. (I would guess five miles)
Friday Sat. & Sunday. Many times called the Plagman Barn.
I would guess a little over a half hour from Prarie Du Chine Wisconson. There maybe a short detour at the intersection of 18 and 52. It was supposed to open today, but nothing is etched in stone.
Ask for Dave Bacon, usualy near the rock crusher and say hello. No suit and tie required.
It's a smaller show, but usualy a favorite. We call it the Garber farm progress show.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Hydraulics - Cylinder Anatomy - by Curtis von Fange. Let�s make one more addition to our series on hydraulics. I�ve noticed a few questions in the comment section that could pertain to hydraulic cylinders so I thought we could take a short look at this real workhorse of the circuit. Cylinders are the reason for the hydraulic circuit. They take the fluid power delivered from the pump and magically change it into mechanical power. There are many types of cylinders that one might run across on a farm scenario. Each one could take a chapter in
... [Read Article]
Latest Ad:
Late 50s early 60s international harvester 560 with cultivator
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.