Posted by KEB on August 29, 2007 at 07:39:40 from (192.91.171.36):
In Reply to: Re: OT Winch size posted by Leland on August 28, 2007 at 19:22:30:
I have an 8,000 lb Champion winch I got from Costco (think its the same one HF sells) and a run of the mill deep cycle battery mounted on the trailer. I've never run the battery down loading anything. I've put two non-running tractors on the trailer and still had plenty of power left for the winch.
I do have the battery wired to charge from the tow vehicle like an RV, but I don't normally leave the truck running when I'm using the winch.
I usually use a snatch block just to slow down the speed at which stuff comes up the ramps, plus it reduces strain on the winch. I try not to push cheap stuff to anywhere near its rating. I suspect that might have something to do with the battery lasting longer also, since the winch motor doesn't generate anywhere near as much heat with the snatch block. The wire size in the motor is probably marginal, and putting a really heavy load on it results in a lot of energy loss as heat due to the undersized windings. Even though it runs twice as long with the snatch block, it draws a lot less than 1/2 the current...
Its not a Warn, but it works for what I need and was less than half the price of a good one.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Rescue of a Fordson F - by Anthony West. Introduction I live in the UK and have for many years restored Fordson tractors (in the main model N's). I have also restored and shown model F's, E 27N's, Field Marshall Series 2, David Brown Cropmasters and the old rey Fergeson T 20. At one time I had seven restored examples which were shown and used in ploughing matches. As most restorers, I have a number of war stories I can relate on a range of topics that may help other like minded and interested people. Perhaps my first p
... [Read Article]
Latest Ad:
one 8n and one 9n tractor. totaly restored,pretty much everything is new. one 6ft blade good shape.
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
