Tractor Talk Discussion Board |
Re: SWITCHES: (3 position) current control/lights
[ View Follow Ups ] [ Post Followup ] [ Return to Tractor Talk Discussion Board ]
Posted by Dave on November 09, 1999 at 06:55:18 from (138.139.91.1):
In Reply to: SWITCHES: (3 position) current control/lights posted by Mike B on November 04, 1999 at 19:32:18:
Your right. The 3 ohm resistor in the field allows you to select a high or low current generator output. I believe that you can get these from an AGCO Allis dealer. Otherwise, get a marine pull switch from NAPA. Make Sure that you get an off-on-on with two separate circuits. Your lights are separately connected to 6v at the switch extreme. I rewired my switch so that my lights are on the on-off switch and generator is solo on the current switch.
Follow Ups:
Post a Followup
|