Re: Certificate of Conformity

Posted by Jerry/MT on August 12, 2007 at 20:32:55 from (206.183.116.129):

In Reply to: Certificate of Conformity posted by Bill from Scotland on August 12, 2007 at 15:31:00:

Most safety rules between the US and the EU have been "harmonized" so that certification under EU of rules is equivalent to certification under US rules. I know the FAA and the EU were in the process of doing that when I worked in the aircraft industry(Boeing).
I believe that MF is part of the AGCO group so I would try to get the dealer to get of his dead arse and get you the certificate from them.

I believe the cabs in this country are certified to some standard, be it SAE or ASAE because OSHA probably requires it. I have seen films of rollover tests of JD tractors with cabs and with ROPS and I believe these tests are part of the certification process. The conformity certificate merely states the the article was manufactured and has a bill of materials such that the article is conformity with the applicable cerrtification rules and standards that were in effect at the time of manufacture.

Replies:

• Re: Certificate of Conformity Bill from Scotland 14:31:53 08/13/07 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]