Re: what could go wrong ;)

Posted by Matt from CT on August 06, 2007 at 11:00:17 from (76.221.220.23):

In Reply to: what could go wrong ;) posted by Lanse on August 06, 2007 at 07:41:29:

Here's a Craftsmen for $25 that will do the motor to do up to 75#.

Check the owner's manual on your New Holland for the torque specs on various maintenance items on that -- might want to spend $5 bucks more for the next heavier duty one that will do 150#.

The lighter one may be a bit more accurate for the engine head, but I'd personally still rather use the bigger torque wrench and be in the ballpark then guess and not be sure I'm playing the right game.

• Craftsmen $25

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]