Re: fence stretching question

Posted by Jon (IN) on August 01, 2007 at 14:07:23 from (63.165.98.157):

In Reply to: fence stretching question posted by Rick Kr on August 01, 2007 at 07:02:16:

Dad used to have a tool he made to put the kinks back in the fence to stretch it back out a bit. It was 3 pieces of 3/4 or 1" galv pipe, using a "Tee" he made the pipe into a T shape that was about 6" wide by 6" long. Then a slot was cut in the end. By putting the slot on the fence and giving a twist, you could rekink the fence.

I really didn"t know why you would use the kinks instead of restretching it, but the heat/cool cycles make sense.

Jon

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]