|
Tractor Talk Discussion Board |
Re: 6 or 12 v coil ???
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by John T on July 31, 2007 at 19:03:19 from (66.244.83.147):
In Reply to: Re: 6 or 12 v coil ??? posted by Allan In NE on July 31, 2007 at 17:03:45:
Allan, NOT to be a smart alek or nuttin but simply to help others, heres some info for yall: A generic tractor starter is a series wound DC motor with the armature n field wired in series and a 6 volt starter will have different current ratings then one designed for use on 12 volt. As we all know, however, you can use 12 volts on a 6 volt starter n provided you dont let it crank too long n overheat thay can last a long time other then perhaps premature bendix wear from the higher kick in torque. HOWEWVER if you use 6 on a 12 volt starter she wont work worth a dern lol. A 6 volt coil IS NOT same as a 12 volt coil. A typical 6 volt will have around 1.5 ohms of primary resistance as measured between its lil + and - terminals while a 12 volt coil (some call internally ballasted) will have more like 3 ohms. If you use 12 volts on a 6 volt coil it will run too hot and the points burn up soon and likewise, if you only use 6 volts on a 12 volt coil it will yield a weaker spark. There is some truth in your statement since a coil is more of a current then a voltage device. Its the current passing through the primary winding that develops a magnetic field in which energy gets stored and why (GIVEN the correct current) a 6 volt coil can develop a spark of sufficient energy just the same as a 12 volt coil can..... Moral of story, they reallyyyyyyyy arent the same. Hope this helps, God Bless n yall take care now John T
Replies:
Home
| Forums
| Order Support
Today's Featured Article -
Harvestin Corn in Southern Wisconsin: The Early Years - by Pat Browning. In this area of Wisconsin, most crops are raised to support livestock production or dairy herds in various forms. Corn products were harvested for grain, and for ensilage (we always just called it 'silage'). Silo Filling Time On dairy farms back in the 30's and into the first half of the 40's, making of corn silage was done with horses pulling a corn binder producing tied bundles of fresh, sweet-smelling corn plants, nice green leaves with ear; the
... [Read Article]
Latest Ad:
For sale Farmall super A tractor is complete and has just been setting for awhile,it was running when pulled out of the barn,shouldn’t take to much to get it going asking 1100.00
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|