|
Tractor Talk Discussion Board |
Re: O/T Auto trans oil change
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by dhermesc on July 30, 2007 at 11:49:19 from (24.248.193.103):
In Reply to: O/T Auto trans oil change posted by 37 chief on July 30, 2007 at 11:09:40:
Most transmissions don't have a drain on the torque converter so you are only changing about half the fluid. If your transmission is in "good shape" and you've been changing the fluid as recommended doing a "flush" by letting the pump replace the fluid is probably one of the best ways to do it. It takes about 3 quarts more then capacity ensure you get it all. For the most part the "filter" is a screen and wear particles of "newer" transmissions are small enough to pass through. If your transmission is throwing big enough "chunks" to get caught by the screen its on its way out and changing the fluid probably isn't going to help.
Replies:
Home
| Forums
| Order Support
Today's Featured Article -
Fabricating Sidesheets - by Chris Pratt. The easiest and best first-time project for wanna-be sheet-metal workers like myself is flat or nearly flat metal cut and drilled to be a tractor's sidesheet. A sidesheet is sheetmetal to cover either the engine as in the case of early Oliver's, Massey-Harris' and many crawlers or the wiring and electrical components as in the case of the Massey-Harris Pony, Allis Chalmers' D Series (D-14, D-15, D-12, D-10, D-17, and D-19). The need for fabricating becomes obvious when you go to buy any of these
... [Read Article]
Latest Ad:
For sale Farmall super A tractor is complete and has just been setting for awhile,it was running when pulled out of the barn,shouldn’t take to much to get it going asking 1100.00
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|