Re: ring gap in a tisco piston/sleeve set

Posted by RustyFarmall on July 29, 2007 at 10:51:48 from (66.43.253.26):

In Reply to: ring gap in a tisco piston/sleeve set posted by Mark Doud on July 29, 2007 at 09:27:47:

I think that is already done for you at the factory. The pistons with the rings installed are already installed in the sleeves. Of course that piston needs to be removed from the sleeve in order for both to be installed in the engine block, so be sure that each piston and ring set goes back into the same sleeve that it came out of. Sure wouldn't hurt to check a few of them though.

Replies:

• Re: ring gap in a tisco piston/sleeve set Mike M 18:01:36 07/29/07 (0)
• Re: ring gap in a tisco piston/sleeve set Farmall MD 11:33:29 07/29/07 (3)
  • Re: ring gap in a tisco piston/sleeve set RustyFarmall 15:14:50 07/29/07 (1)
    • Re: ring gap in a tisco piston/sleeve set Farmall MD 01:34:16 07/30/07 (0)
  • Re: ring gap in a tisco piston/sleeve set Mark Doud 11:41:05 07/29/07 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]