Re: Need input on Dodge Truck

Posted by barnrat on July 28, 2007 at 06:41:03 from (64.66.118.183):

In Reply to: Need input on Dodge Truck posted by Jrry on July 28, 2007 at 05:41:32:

My best friend designed the frame on the '02 and up Dodge's, I've also mostly owned Dodges all my life. I've never had much luck with the Fords, Chevys or Toyota's. The hemi motor in those is basically bullet proof, Lottsa power, I have an '03 dodge 2500 4x4 hemi quad cab shortbox with a snow plow and manual transmission. I have put 80,000 miles on it since I bought I've only put a clutch in the thing so far. I also have a 28ft gooseneck that I tend to over load with tractors, equipment or hay. you should be able to yank around a trailer with no problem with that truck.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]