Posted by Clinton E. Hofstetter on March 06, 1998 at 11:59:38:
In Reply to: Question IH Super C Hydraulic Hose Routing posted by JOHN on March 05, 1998 at 17:31:14:
Years ago my neighbor had a loader on his super C. His had only hydraulic on the lift and was a mechanical trip on the bucket. I think that he had a "selector" valve to isolate the loader valves from the fast hitch controls. There was also an auxulary tank for hydraulic fluid that was connected at the fill plug for the touch control. The tractor touch control system will not have enough oil if any of the loader cylinders are one way only. This is as much as I can remember. This was over thirty years ago.
: I purchased an IH Front End Loader Model IHC WV3 1232 which originally came off an Super C but all the hoses were missing and I would like to find some one who could help in the correct routing of the hydraulic hoses.
: The Super C I have has the fast hich drawbar with the hydraulic rear cylinder. The loader has two hydraulic valves one for the lift ( one way cylinder) and the other for the front dump bucket (two way cylinder). I think I may need to install another valve which would islolate the rear draw bar when the front loader is in use.