Re: Farmall 300 - Need a tachometer

Posted by Matt Weltz on July 23, 2007 at 18:13:26 from (167.142.225.157):

In Reply to: Farmall 300 - Need a tachometer posted by Kevin Rapes on July 23, 2007 at 13:19:41:

If you got the same one I got, it is actually for a 300 utility. You can make it work though. You just have to loosen a few cap screws, turn the face upside down in the housing and change to location of the holes in your tack mounting bracket. The speeds are slightly slower, but I like it more for the RPM reading and hour meter anyway. Plus these have a back light that the original did not have. Once you get it figured out it shouild work great for you if you decide to go ahead and use it. Just my 2 cents...

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]