Re: IH 674 carburetor

Posted by RustyFarmall on July 18, 2007 at 05:41:34 from (66.43.253.26):

In Reply to: IH 674 carburetor posted by Jsauvage on July 17, 2007 at 17:05:09:

I can't tell you the size of those threads, but I do know they are common machine threads, not tapered pipe or anything. Take the carb and the solenoid with you to good auto parts store and they should be able to match up a thread cutting tap so you can re-tap the hole. If the threads are too badly stripped, that won't work though. You might be able to get a heli-coil insert that will repair it. Another option is to just find another carburetor, either new or used.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]