|
Tractor Talk Discussion Board |
Re: That's a bit silly
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by jdemaris on July 16, 2007 at 07:13:40 from (69.67.229.143):
In Reply to: Re: That's a bit silly posted by Tramway Guy on July 16, 2007 at 06:14:16:
My International Harvester B-275s have the CAV inline pumps with pneumatic governors. In regard to fuel efficiency, they test just as well as many other similar sized diesels with wide-open air intakes. B275 has been tested with a 33 horse load and a fuel efficiency of 14.3 horsepower hours per gallon of diesel fuel. Now compare that to a similar sized diesel with wide-open intake - a Deere 1020 diesel - loaded at 39 horsepower it runs an efficiency of 14.7 horsepower hours per gallon. Many similar sized diesels with open-air intakes are worse on fuel - e.g. Allis Chalmers D15 36 horse 12.7 HHG (I won't list more, there are too many) One big advantage to diesel - is the fuel weighs more than gasoline - i.e. there is more fuel in a gallon and more BTUs. My main point was - and is - most diesels are only efficient at certain power loads and RPM ranges. You might have a large tractor that is highly efficient when being worked at 100 horsepower, but the same tractor when only worked at 20 horse is likely to use a lot more fuel per work done - than a smaller tractor doing the same job - gas or diesel. Didn't think anybody would try to argue that point. Most farmers I've worked with or known - always had small tractors for light work due to fuel efficiency. My neighbor - year ago - bought two brand new Deere 4020s (still has one). He loved the tractors for heavy work, but always griped about what fuel hogs they were on his silo blower which only needs about 20 horsepower. He finally bought - new - a little 30 horse British Allis Chalmers ED-40, and it did the same job on almost half the fuel. That's why I posted the Deere specs showing what a dog it becomes when not worked hard. And, those specs are with PTO work loads and have nothing to do with excess tractor weight. Another example is that of electric gensets. If you take a 60 horsepower 20KW genset and use it to make 500 watts, it is highly inefficient. That because the engine is too big for a small job. A little gas generator rated a 750 or 1000 watts max will make 500 watts using much less fuel - than the large diesel genset.
Replies:
Home
| Forums
| Order Support
Today's Featured Article -
Weldin Basics, Part 3 - by Curtis von Fange. Oxy-acetylene Welding - Part One In our series on welding we have taken a brief look at AC and DC arc welding along with basic techniques and safety equipment required for safe usage. Since our premise is to cover welding types that might best be used on a farm environment we have kept our overview purposefully simple and general. The second type of welding that this observer finds quite useful in
... [Read Article]
Latest Ad:
For sale Farmall super A tractor is complete and has just been setting for awhile,it was running when pulled out of the barn,shouldn’t take to much to get it going asking 1100.00
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|