Re: Bush-Hogging Issue

Posted by mitch furness on July 14, 2007 at 21:58:17 from (220.245.180.133):

In Reply to: Bush-Hogging Issue posted by Rob In FL on July 14, 2007 at 14:44:18:

http://www.bare-co.com/files/pto2002/selgearbox.htm

Rob see attached a link to Bare-co rotary cutter gearbox website. Use this if you need a new box. I would not use gearbox oil as it was said earlier you cannot ensure that all bearings are covered in it especially at the top. Are you sure that the shroud underneath gearbox is not caught on the shaft where it protrudes through the floor of the slasher.

Pleased your Ford is running smoother.

Cheers

Mitch

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]