Tractor Talk Discussion Board |
Re: International Hough H90c
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by DMont on July 09, 2007 at 17:26:38 from (72.24.77.157):
In Reply to: International Hough H90c posted by Michael Miles on July 08, 2007 at 08:20:50:
Does the engine seem to reach max rpm? That is a DVT573 incidentially. I suppose you have changed the fuel filters. You should get a full line of fuel from the supply. The boost pressure ( turbo pressure ) at full engine rpm and transmission stalled should be somewhere around 19 inches of water. That is not the exact but a bench mark. If you stall the hydraulics ( hold a hydraulic lever in engaged position ) as the transmission is stalled the engine should maintain rpm with some black smoke. You don't hold those two engaged for just about 5 sec. Transmission ( stall ) is in gear with the brake on with full rpm. Check all fluild levels...oil and water before checking this method. That tractor was very good and a work horse when performing as designed.
Replies:
Home
| Forums
Today's Featured Article -
A Farmall Story - by Ed Meadors. The year was 1978. Our young family had recently moved to rural Chesapeake, Virginia to a plot of land which would finally allow us to realize our dreams of a huge garden, critters and more lawn and pasture than we would ever use! We needed a TRACTOR; not a riding mower or tractor wannabe, but a real TRACTOR. The answer to our needs materialized in the form of a '44 Farmall A, complete with cultivators, discs, single plow, a 5ft.Woods belly mower and one, mounted spare 9.00x24 rear wheel.
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|