Re: 1086 to plow

Posted by paul on June 30, 2007 at 23:41:21 from (66.44.133.16):

In Reply to: 1086 to plow posted by D17 man on June 30, 2007 at 17:29:50:

Typically 'here' a 4-20 or 5-18 plow (we have tough soils....); line up the right side rubber so it follows & is set right for the furrows to line up. Typically the rubber in pretty close tot he tractor, but depends on the size of the plow & all.

Here any plow worth it's salt is a semi-mounted. a 4-20 IHC 720 would be cool, or the Oliver/White later plows. They handle cornstalks & trash well, and pull pretty easily.

--->Paul

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]