Re: exhaust manifold

Posted by RodInNS on May 29, 2007 at 19:35:47 from (24.224.246.156):

In Reply to: exhaust manifold posted by mss3020 on May 29, 2007 at 18:32:59:

I'd try breaking the bit out with a punch. Failing that, drill a larger hole into the broken bit so you can get a hold of it. They're often loose in the hole even though they're broken. Sometimes a needle nose will work wonders IF you can grab it. Failing that, heat... and see if that softens the broken bit. Then try to drill it again.... but I'm pretty sure if you can't extract it with the plires, it will break with a punch.

Rod

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]