Re: Continentel F-124 Camshaft

Posted by george md on May 28, 2007 at 19:08:04 from (12.177.53.71):

In Reply to: Continentel F-124 Camshaft posted by Don Byers on May 28, 2007 at 16:11:27:

Don,
Many of the older ind engines did not have any
overlap in the cam grind. None of the major after-
market suppliers have a cam listed or I could
get you the specs, I looked all the way back to a
73 trw book.
Symptoms sound like tight intake valves ( but
you have been there ), my continental sheet says
cold set .016 and .018 . Also poor seating of the
intake valves or exhaust lobes worn short.Worn
ex lobe will usually run well at idle but at hi
rpm the cylinder can't get rid of all the exhaust.

george

Replies:

• Re: Continentel F-124 Camshaft Don Byers 05:56:01 05/29/07 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]