Re: fuel problem on 1194 Case

Posted by N. TX Tim on May 25, 2007 at 20:57:20 from (12.106.223.124):

In Reply to: fuel problem on 1194 Case posted by fudpucker on May 25, 2007 at 18:38:17:

I have a 1394...but my operators manual is down at the shop right now...otherwise I would type out the instructions for replacing the filters. If it is the same setup which I imagine, I think there are bleeder screws on top of each filter housing that need to be loosened, then the hand primer on the right side needs to be actuated.

When I changed mine last year, there was a lot of gunk in the clear glass bowl on/near the primer...that may interfere with its operation. Also, he may have forgotten the 'O' rings on the inside of the filter housing or gotten it out of position/lodged in the line.

I know this isn't a lot of help...will try to remember to get the manual up here tomorrow morning.

Good Luck,
Tim

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]