Re: Ford 600 stalls when hot

Posted by old on May 10, 2007 at 12:17:47 from (4.244.6.230):

In Reply to: Ford 600 stalls when hot posted by Lester Thomas on May 10, 2007 at 09:48:48:

I would start by pulling the drain plug on the bottom of the carb. Let fuel drain out of it for 5 minutes at the very least, catch it in something to save your self a few $$ and also so you can make sure it doesn't have a lot of rust/dirt in it. If you have good flow then I would check spark at the plugs. It needs to be a nice brite blue spark. If it isn't then points and condenser may be needed. If it is a good brite spark start it up and when it dies check for spark again. If you don't have spark then jumper across the ignition swithc or hot wire it to make sure its now a bad switch. If that doesn't help replace the condenser, if that doesn't work then on to the coil.

• Hobby farm

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]