|
Tractor Talk Discussion Board |
Re: wide front rims for 6030 john deere
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by Glen in TX on April 30, 2007 at 10:47:53 from (208.246.9.92):
In Reply to: wide front rims for 6030 john deere posted by francis pawelek on April 29, 2007 at 18:42:57:
You'll want some 16.1 rims which should be available in 11,14,16,& 18" widths with 8 hole 6" center pilot hole or 6.010" center hole. 6030 used 9.50-20 tires on row crop models on 7x20" rims. Standard tractors and combination used 11.00-16 tires or larger 14L-16.1 tires or 18L-16.1 tires. Find some of the larger tires and then whatever rim width in 16.1 wheels tire manufacturer recommends for them. Also be aware you may find those tire sizes in tube type or tubeless so get rims that will work for tubeless if that's only kind of tire you can find. JD no longer shows specs or prices for those larger rims for 16.1 but might also try salvage yards in Kansas or other large wheat growing areas because regular implement wheels may not have the correct offset needed and tires could rub on steering arms.
Replies:
Home
| Forums
| Order Support
Today's Featured Article -
Tractor Profile: Farmall M - by Staff. H so that mountable implements were interchaneable. The Farmall M was most popular with large-acreage row-crop farmers. It was powered by either a high-compression gas engine or a distillate version with lower compression. Options included the Lift-All hydraulic system, a belt pulley, PTO, rubber tires, starter, lights and a swinging drawbar. It could be ordered in the high-crop, wide-front or tricycle configurations. The high-crop version was called a Model MV.
... [Read Article]
Latest Ad:
1958 FORD RARE 4x4 801 TRACTOR, ELENCO/FRONT DRIVE, FRONTLOADER AND WEIGHTED REAR WHEELS, FIVE SPEED, LIVE PTO, GAS ENGINE, NEW REAR WHEELS AND TIRES, ENGINE RUNS.
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|