Tractor Talk Discussion Board |
Massey Tach
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by Don-Wi on April 28, 2007 at 22:29:47 from (70.224.214.115):
I got a Massey tach from a guy off ebay, and while it looks EXACTLY like the old one from our 285, it has a different way of attaching the drive cable. Looks like a push-on type of connection. It is part # 772661M91, Stewart Warmer # 555KB3 Also, would the tach cable for what ever this one is for be long enough or would it work on the 285, so I don't have to get yet another tach? I still need to find a new tach drive as well, so do I HAVE to go with one made for the 285, or can I get one off any Massey w/ a perkins, or what models tach drives would work? We really want to get this tracotr in the feild but I'm a little leary of racking up hours and unknown RPM's on a fresh overhaul. Donovan from Wisconsin
I put this on the Massey board too, but any help I can get is appreciated. I posted the link to the ebay auction, he has several and he sold me this one outright. I should have looked at the 2nd picture of the backside first, but I was in too much of a rush and didn't.
Replies:
Home
| Forums
Today's Featured Article -
Field Modifications (Sins of the Farmer) - by Staff. Picture a new Chevrolet driving down the street without it's grill, right fender and trunk lid. Imagine a crude hole made in the hood to accommodate a new taller air cleaner, the fender wells cut away to make way for larger tires, and half of a sliding glass door used to replace the windshield. Top that off with an old set of '36 Ford headlight shells bolted to the hood. Pretty unlikely for a car... but for a tractor, this is pretty normal. It seems that more often than not they a
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|